Lone worker protection: alarm devices (PTI, DATI) and indoor location of workers

Updated October 23, 2026 · InVirtus Technologies, Nantes, France

A lone worker alarm device, called DATI in France (dispositif d'alarme pour travailleur isolé), sends an alarm, triggered by the worker or automatically, to a person able to organize the rescue. "PTI" (protection du travailleur isolé) is the common commercial name for the same type of equipment. But an alarm is only useful if responders know where to go, and inside a building, GPS does not tell them.

InVirtus provides the layer that many lone worker systems lack: locating the worker room by room, without a heavy network to install. We have deployed it on a nuclear site, where concrete and metal make indoor location particularly difficult.

PTI or DATI: what is the difference?

Technically there is none: PTI and DATI refer to the same equipment, but INRS, the French occupational safety institute, recommends the term DATI. According to INRS, the name PTI is misused by some manufacturers, because it suggests that the device alone protects the worker (INRS).

PTIDATI
MeaningLone worker protectionLone worker alarm device
Who uses the termManufacturers, everyday useINRS, safety professionals, specifications
What it refers toThe same alert box, badge or smartphoneThe same alert box, badge or smartphone
What the term suggestsThat the device protectsThat the device alerts, and that protection comes from how the rescue is organized

The two types of alarm

Automatic alarms save unconscious workers, but they also generate false alerts: when set too sensitive, users end up switching them off, as INRS points out.

What do the rules on lone working say (France)?

French labor law does not define lone working and does not require a DATI: it requires employers to assess risks and organize first aid, and a DATI is one way to do so. INRS notes that, in the absence of a regulatory definition of lone working, the general obligations apply (INRS, regulations).

Key point when choosing equipment: a DATI does not relieve the employer of its obligations. For INRS, it does not replace the prevention approach and is used only to organize the rescue as part of a procedure.

The weak link: knowing where the worker is indoors

A lone worker alarm that alerts without saying where the worker is makes responders lose the time needed to find them. INRS lists "where is the lone worker?" among the questions to settle before choosing a device.

Outdoors, most lone worker devices send a GPS position. Indoors, GPS does not get through or gives a position tens of meters off. Yet indoors is where the most difficult situations are found:

Conventional indoor location solutions raise another problem: they require cabling antennas and a network in buildings where every hole drilled must be authorized.

Our approach: fixed beacons, read by the worker's device

Rather than installing a location network, we place a Bluetooth Low Energy beacon in each room or zone; the worker's device reads it and adds its identifier to the alarm.

Lone worker alarm with BLE beacons: the worker's device reads the room beacon and adds its ID to the alarmBLE beaconfixed ineach roomWorker device(lone workeralarm): reads beaconAlarm+ roomidentifierRespondersbuilding, floor,room
The worker's device reads the nearest beacon and adds its identifier to the alarm: responders know which room to go to.

Why this architecture

To check coverage, battery-powered ivScan Poseidon anchors can be installed temporarily: they listen to the beacons and report their presence without a local network.

Case study: locating lone workers on a nuclear site

A French nuclear industry operator chose our beacons to locate its workers inside the buildings of a nuclear site, as part of its lone worker alarm project.

NeedAccurate location of workers within nuclear sites, to ensure a fast response in the event of an alarm
ConstraintsConcrete and metal buildings; beacons that must not be reconfigurable after installation
SolutionivBeacon Lite beacons fixed in the buildings, read by the operator's Android app on the workers' devices; ivScan Poseidon anchors for fine-tuning
AdaptationsHardened firmware for the project: changeable keys, connected mode switched off after installation, configuration locked after initial setup, "Just Works" pairing removed
Implementation2 InVirtus engineers on site to train the teams and position the beacons and anchors; help decoding the frames for the operator's application team
Lead time8 weeks between order and delivery
Volumes studiedFrom 150 to 1,000 beacons depending on scope

What we learned: on a nuclear site, the real difficulty is not the radio, it is cybersecurity acceptance and installation without building work. A battery-powered beacon that cannot be reconfigured and is read by an already qualified device removes both obstacles.

Checklist: 10 questions before choosing a lone worker alarm

This checklist covers the questions INRS asks to settle upfront, and those we ask on every project.

Organization

  1. Are lone working situations identified in the risk assessment, job by job?
  2. Who receives the alarm, 24 hours a day, and which procedure triggers the rescue?
  3. How do you tell a real alarm from a false one without delaying the response?
  4. How do responders physically reach each area, including controlled-access areas?

Equipment

  1. Which automatic alarms are needed (loss of verticality, no movement, device torn off, gas) and with which settings to limit false alerts?
  2. Does the network reach everywhere the worker goes (basements, technical rooms, concrete buildings)?
  3. How does the alarm indicate the worker's location indoors: building, floor, room?

Indoor location

  1. Do you need location to the room, the zone or the meter?
  2. Can equipment be installed without building work or cabling in the buildings concerned?
  3. Are the location beacons protected against unauthorized reconfiguration?

A lone worker alarm device answers questions 5 and 6. Questions 7 to 10 are about indoor location, and that is where we come in.

Frequently asked questions about lone worker protection

What is a lone worker?

There is no regulatory definition in France. In practice, it is an employee who works out of sight and earshot of other people and could not be rescued quickly in the event of an accident or illness.

Is a lone worker alarm device mandatory?

Not as such in France. The employer must assess the risks of isolation and organize the rescue; a lone worker alarm is one way to do this, never a substitute for prevention.

What is the difference between a PTI and a DATI?

Technically none. DATI is the term used by INRS; PTI is a commercial name that INRS considers misleading, because the device alerts but does not protect on its own.

Can a smartphone be used as a lone worker alarm?

Yes, with a dedicated app that handles the alert button and automatic detection. The smartphone can also read fixed Bluetooth beacons to give the room where the worker is.

How do you locate a lone worker inside a building?

GPS does not work indoors. The simplest method to deploy is to place one Bluetooth Low Energy beacon per room or zone: the worker's device reads it and adds its identifier to the alarm.

Can workers be located without installing a network?

Yes. Our beacons run on batteries and are read by the worker's device. There are no cables or gateways to install in the buildings.

Let's talk about your project

Do your workers work alone in buildings where GPS does not reach? We will work out with you the number of beacons needed and their integration into your lone worker system. Talk to an engineer

Learn more: discover our industrial Bluetooth beacons and our guide to RTLS and indoor positioning.

Sources

© 2026 - inVirtus Technologies

Crafted by :
labuche.pro
Contact us
envelopephone-handset